Vinci Spark 100 Kit - Voopoo

Vinci Spark 100 Kit: A Sparkling Design

Voopoo transports you to a celestial realm with the Vinci Spark 100 kit. At first glance, the rectangular aluminium alloy box may seem quite ordinary, but it hides a luminous surprise. Its magnetic side panel lights up with 144 LEDs, simulating a starry sky. The animations vary depending on the current action (charging, vaping, or powering on). A cosmic touch that you can disable if you'd rather stay under the radar.

The celestial theme doesn’t stop there, as the 0.96” TFT screen also offers two animations: a UFO for the dreamers or a meteor shower for the realists (animations can be disabled).

At the top of the Vinci Spark 100 box, you’ll find a sturdy and elegant UForce-X Nano tank made of stainless steel. Together, they form a compact kit measuring 143 × 33 × 28 mm.

A Simple Yet Powerful Chipset

The Vinci Spark 100 doesn’t just dazzle with its looks; it also features a chipset that gets the job done. With 100 W of maximum power and various modes, you can easily customise your vaping experience: let the Smart mode handle the power for you, switch to RBA mode for full control, or go for Eco mode to save your battery life.

You can vape worry-free thanks to the multiple protections this chipset offers: no short circuits, no overheating—just pure vaping bliss. And locking your mod is hassle-free too, thanks to a small switch that does the job effortlessly.

The Flexibility of an External Battery

Voopoo has prioritised practicality by equipping the Vinci Spark 100 with an 18650 battery (not included). Once the battery is inserted behind the magnetic side door, the show can begin. Is your battery running low during the day? No problem: simply carry a spare fully charged battery, and you’re good to go.

For quick emergency charging, the Vinci Spark 100 features a USB-C port supporting 5 V/2 A charging. However, always prioritise using an external charger to ensure the longevity of your batteries.

Need an 18650 battery or a charger? Find everything you require on Freevap.

UForce-X Nano: A Versatile Tank

Designed for versatility, the Vinci Spark 100 kit includes the UForce-X Nano clearomiser. With a 4.5 ml capacity, it reduces the frequency of refills. For personalisation, the adjustable top airflow ensures precise control of airflow while preventing leaks. To complete your setup, the tank comes with a replaceable 510 drip tip. Whether you prefer an airy draw or a tighter vape, this clearomiser caters to all preferences, being compatible with all PnP-X coils.

This kit includes two coil models:

• PnP-X 0.3 ohm: RDL draw - use between 32 and 40 W - PG/VG ratios from 50/50 to 30/70 - Nicotine levels up to 6 mg/ml.
• PnP-X 0.6 ohm: MTL/RDL draw - use between 18 and 23 W - PG/VG ratios from 60/40 to 40/60 - Nicotine levels up to 12 mg/ml.

Looking to explore other vaping sensations or stock up on coils? Check out the PnP-X coils on Freevap.

How to Use the UForce-X Nano

Filling the Tank

1. Unscrew the top cap.
2. Insert the nozzle of your e-liquid bottle into the fill port.
3. Fill the tank with your favourite juice.
4. Screw the top cap back on.

Replacing the Coil

1. Remove the clearomiser from the box.
2. Unscrew the base of the tank to access the coil.
3. Remove the used coil and insert a new one with a simple push.
4. Screw the tank base back on.

Note: if the coil is new, let it soak in e-liquid for 10 minutes before vaping. If you notice diminished flavours or a burnt taste, it’s time to replace your coil.

What's Included in the Vinci Spark 100 Kit

• 1 Vinci Spark 100 box
• 1 UForce-X Nano clearomiser
• 1 PnP-X 0.3 ohm coil
• 1 PnP-X 0.6 ohm coil
• 1 replacement bubble glass (4.5 ml)
• 1 set of spare O-rings
• 1 USB-C cable
• 1 user manual