Pod Sceptre 3 ml - Innokin

3ml MTL DTL Multifunctional Bottom Airflow Adjustable

You have your Innokin Sceptre? Do not miss the replacement cartridge specially created for this pod. Thus, vapote various flavors without taste by adding an eliquid per cartridge

Thanks to its adjustable airflow in the form of a wheel and the 2 resistors supplied (0.5 and 1.2 ohm), preferdirect inhalation (air draft - DL) or indirect (tight draft - MTL). But, choose also between direct aspiration or via the switch.

Filling is very easy on the side by simply lifting the seal. We recommend a 70/30 PG/VG or 50/50 PG/VG ratio. Replace your resistance with the Sceptre coils, by rotating the base of the cartridge.

3ml MTL DTL Multifunctional Bottom Airflow Adjustable Side Filling

Product Description

A replacement cartridge for the Innokin Sceptre pod

You already own the Sceptre pod kit from Innokin? Buy one or more replacement cartridges with an eco-responsible packaging, respectful of the environment. Why should you do this? You will pre-fill your cartridges so that you will only have to change them in one go. But also, you can fill your cartridges with an eliquid in each to vaper different flavors without taste.

The cartridge Sceptre Innokin, a direct or indirect inhalation

The Sceptre pod cartridge allows a direct inhalation (air draw - DL) or indirect (tight draw - MTL). Perfect for multipurpose use! The pod is equipped with a wheel that is actually an adjustable airflow to change the airflow according to your preferences. But also, 2 resistors are delivered:

- Coil of 1.2 ohm: allowing indirect inhalation, the use of nicotine salt while having an excellent restitution of flavors

- Resistance 0.5 ohm: for direct inhalation and optimal production of steam

Finally, you can vaper either by pressing the switch or by inhaling directly.

The filling of the cartridge pod Innokin sceptre

The filling of the cartridge is very easy and is done on the side. Moreover, it is leak-proof. To fill it, you just have to lift the seal. As for the ratio, we recommend 70/30 PG/VG or 50/50 PG/VG.

You want to change the resistance of your replacement pod Sceptre?

In your replacement pod, you can insert either the Sceptre resistance in 1.2 ohm, 0.65 ohm or 0.5 ohm. Again, it's easy to replace! Rotate the base of the cartridge. Then, remove the damaged coil by unscrewing it, insert the new resistance and finally replace the base of the cartridge. Fill the tank with eliquid. Be careful, wait a few minutes before vaping so as not to prematurely damage your resistance.