Cartridge Nautilus prime X for BVC Nautilus - Aspire | 4,5 ml

BVC Nautilus Replacement Cartridge for Aspire Nautilus Prime X Pod

The replacement cartridge for the Nautilus Prime X of Aspire is available in Nautilus model of 4.5 ml. This one will allow you to switch easily and quickly from one e-liquid to another or replace a worn out tank. The replacement tank offers more versatility (DL and MTL). It is even equipped with an anti-leak system.

The cartridge BVC Nautilus 4.5 ml Aspire

The BVC Nautilus 4.5 ml cartridge is made of PCTG. This one is compatible with the BVC Nautilus coils:

- BVC Nautilus of 1.6 ohm mTL : tight draw - to be used between 7 and 12W - Ratio 50PG/50VG or 70PG/30VG - Very high nicotine content (0 to 18 mg)

- BVC Nautilus 1.8 ohm: MTL tight draw - to use between 10 and 14W - Ratio 50PG/50VG or 70PG/30VG - Very high nicotine content (0 to 18 mg)

- Nautilus 2 BVC of 0.7 ohm rDL : restrictive overhead draw - to be used between 18 and 23W - Ratio 50PG/50VG or 30PG/70VG

- Nautilus 2S BVC 0.4 ohm air draft - to be used between 23 and 28W - Ratio 50PG/50VG or 30PG/70VG

- Nautilus 2S BVC mesh of 0.7 ohm rDL : restrictive overhead draft - to be used between 20 and 25W - Ratio 50PG/50VG or 30PG/70VG

- Nautilus AIO Nic Salt 1.8 ohm mTL - to be used between 10 and 12W - Ratio 50PG/50VG or 70PG/30VG - Nicotine salt

How to use the cartridges Nautilus prime X of Aspire?

The filling of the tank is done on the side by lifting the silicone tab after removing the cartridge from the pod. The ratio PG / VG will depend on the coil installed. To change the coil, remove the cartridge from the pod, then simply pull the damaged coil. Prime the new coil and insert it into its slot. Wait a few minutes before vaping after replacing everything.