Caliburn G3 Pro Pod Kit - Uwell

Caliburn G3 Pro pod: the little pod in full-screen mode

Uwell has been producing high-quality pods for us over the years. With the Caliburn G3 Pro, the succession is assured. Dressed in a zinc alloy coating, this podmod combines slimness and robustness, while pushing back the boundaries with its giant screen. Perfect for vapers with a bit of a sweet tooth, the Caliburn G3 Pro's LCD screen covers the entire front panel. At a glance, you can check :

• your wattage;
• the value of your resistance;
• the active activation mode;
• the remaining battery level;
• and Wall-E's cousin.

All this in a compact format that you can easily slip into your pocket, thanks to its dimensions of 123 × 27 × 17 mm. A small window lets you keep an eye on your e-liquid level.

Pod Caliburn G3 Pro: an e-cigarette ready for anything

The Caliburn G3 Pro pod bends over backwards to satisfy as many vapers as possible. With its versatility, power and autonomy, the latest Caliburn is sure to win you over.

Great versatility

If you're looking for a generous vapour or a tighter, more discreet draw, the Caliburn G3 Pro is sure to please. With its adjustable power from 5 to 35 W, you can vape in both RDL and MTL. But the customisation doesn't stop there! There's an adjustable airflow on the edge of the pod, a first for a Caliburn pod.

Intuitive operation

Controlling the Caliburn G3 Pro pod couldn't be easier. Everything is done using a single button.

• Press twice to switch from autodraw mode (activation on inhalation) to a mode allowing autodraw and fire button activation.
• Press three times to adjust your wattage in increments of 1 watt. Five times to switch your e-cigarette on or off.
• Five presses will turn your e-cigarette on or off.

When you install your cartridge, Caliburn G3 Pro recognises its resistance and automatically adjusts its power. After that, you're free to adjust the watts to suit your preferences, bearing in mind that the power is limited according to your resistance to avoid any haphazard settings. If you're a beginner, don't panic, you won't be able to kill your coil with too much wattage.

A high-performance battery

So you can vape with peace of mind all day long, Uwell has installed a built-in 1000 mAh battery in its Caliburn G3 Pro. This battery can be recharged in no time at all via a USB-C port supporting a fast 5V/2A charge (cable supplied). The battery level is clearly indicated on the screen:

• four blocks from 100% to 75%;
• three blocks from 75% to 50%;
• two blocks from 50% to 25%;
• and one block from 25% to 0%.

Pod Caliburn G3 Pro: top-level cartridges

To accompany your Pod Caliburn G3 Pro, you can count on the excellent G3 cartridges. Two cartridges are included in this kit, and depending on the model, you'll benefit from a 2.5 ml to 3 ml reservoir (2.5 ml for the 0.9 ohm version and 3 ml for the 0.4 ohm version). Their U² structure ensures leak-free vaping, while Pro Focs technology guarantees impressive flavour reproduction. The G3 cartridges have integrated non-replaceable coils, so all you have to do is replace your cartridge once your coil has worn out.

Caliburn G3 cartridges come in two versions offering different vape sensations. The Caliburn G3 cartridges are available in two versions, offering different vaping sensations: one will appeal to fans of aerial vaping, while the other is more suited to a tight draw.

• G3 0.4 ohm cartridge: RDL draw - best at 35 W - PG/VG ratios from 50/50 to 40/60 - recommended nicotine levels up to 6 mg/ml.
• G3 0.9 ohm cartridge: MTL draw - best at 18 W - PG/VG ratios from 70/30 to 50/50 - recommended nicotine levels up to 20 mg/ml.

G3 cartridges have built-in non-replaceable coils, so all you have to do is replace your cartridge once your coil has worn out. If you don't want to find yourself unable to vape, look out for Caliburn G3 replacement cartridges on Freevap.

Filling the G3 cartridge

• Remove the cartridge from the battery.
• Open the silicone tab.
• Fill with e-liquid.
• Close the tab.
• Replace the cartridge on the battery.

Replacing the G3 cartridge

• Remove the cartridge with the used coil.
• Insert a new cartridge.
• Warning: if the coil is new, prime it well by letting it soak in e-liquid for 10 minutes before vaping. If you notice a reduction in flavour or a burnt taste, it's time to replace your cartridge.

Kit contents Caliburn G3 Pro

• 1 Caliburn G3 Pro pod
• 1 G3 0.4 ohm cartridge
• 1 G3 0.9 ohm cartridge
• 1 USB-C cable
• 1 user manual