Flexus Stik Pod Kit - Aspire

3ml 1200mAh Internal battery MTL RDL

Flash sale
New versions
The team's favourite

Complementary products

Aspire now offers a pod Flexus tubular format: the Flexus Stik. This vape is ultra mini to carry it everywhere with you and vape discreetly. You will love its tight draw MTL or RDL air with exceptional flavors. The airflow is adjusted by simply turning the cartridge.

Know that the Flexus Stik is easy to use. You just have to choose between the 3 powers (low, mid, high) then the activation is done via the switch button (located under the pod) or just by inhaling. The color of the LED at the base of the pod indicates the power set. The internal battery of 1200 mAh is quickly recharged via the USB-C cable provided.

The magnetic cartridge in PCTG can hold up to 3 ml of eliquid with a bottom fill. It is compatible with the AF coils of Aspire from 0.3 ohm. These coils are made of mesh (kanthal AF) for a better heating surface.

3ml 1200mAh Internal battery MTL RDL

Product Description

The pod Flexus Stik Aspire, a tubular format ultra mini!

After the Flexus Q pod, Aspire returns a Flexus vape, but this time in tubular format very mini to vape discreetly. This ecigarette is easy to use, perfect for novice vapers. In addition, it offers a tight draw MTL or air RDL, all with exceptional flavors. As for the airflow, it is adjustable simply by turning the cartridge.

The tubular design of the electronic cigarette Flexus Stik Aspire

The Flexus Stik shines with its ultra ergonomic tubular shape. It will easily slip into your hand. Its compact size (112.8 mm x 22 mm) will allow you to vape discreetly while being slipped neither seen nor known in your pocket. Made of anodized aluminum, it is also very light (56 g).

The Flexus Stik ecig from Aspire, easy to use

The Flexus Stik is equipped with a built-in battery of 1200 mAh quickly rechargeable via the USB-C cable delivered (1A)

This little gem is easy to use! You just have to choose the power level between 3 (low, mid, high) thanks to the switch button located under the pod. The power level chosen is indicated by a LED color located at the base of the vape:

- Green: high

- Blue: mid

- Red: low

To vape, 2 choices are available to you! Either activation via the switch button or simply by inhaling. The chipset has all the protections in case of short circuit, overheating, overload, low voltage and excessive discharge.

A tight draw MTL or RDL: The Flexus Stik Aspire vape

The Flexus Stik pod is equipped with the flexus Stik cartridge 3 ml magnetized and PCTG. The filling is done from the bottom. For this, you just have to remove the cartridge from the battery. Then remove the silicone cap. Changing the cartridge is also very simple. Unclip the reservoir to reclip another one.

Expect a tight draw MTL or RDL air if you want more vapor. Of course, you find an adjustable airflow with 5 holes. To change the airflow, turn the cartridge.

This cartridge is compatible with AF coils of Aspire from 0.3 ohm. These coils are made of mesh (kanthal AF) for exceptional flavours. 2 coils are delivered to you:

- 0.6 ohm AF coil (mesh and organic cotton): RDL airflow (dense steam) - to use between 15 and 18W - ratio 60PG/40VG to 40PG/60VG

- 1.0 AF coil ohm (mesh and organic cotton): tight draw MTL (excellent flavour rendition) - use between 12 and 15W - ratio 50PG/50VG to 80PG/20VG - compatible with nicotine salts, CBD and high nicotine content

The mesh technology allows a better distribution of heating and therefore promotes the excellent rendering of flavours.

To change the coil, remove the cartridge from the battery, pull the coil and soak the new coil of e-liquid, insert it in its place and replace the cartridge. Finally, wait 10 minutes before vaping.

Attention, it is necessary to change your coil about every 2 weeks depending on your use. Remember to replace your coil when you change flavour or if you feel a burnt taste.

The pod Flexus Stik Aspire is delivered with :

- 1 Flexus Stik battery

- 1 cartridge Flexus Stik 3 ml

- 1 AF coil of 0.60 ohm (mesh)

- 1 AF coil of 1.0 ohm (mesh)

- 1 USB-C cable

- 1 user manual

The characteristics of the Flexus Stik ecigarette from Aspire :

- Dimensions: 112.8 mm x 22 mm

- Weight: 56 g

Technical characteristics

Capacity (ml): 3ml
Hardware format: Vape Pen, Pod system, Mini format - discreet
Battery life (mah): 1200mAh
Battery type: Internal battery
Type of inhalation: MTL, RDL
Airflow: Bottom Airflow, Adjustable
Fill type: Bottom Filling
Compatible coils: AF Coils
With settings: Yes
Charging possible via USB: Yes
Country of manufacture: made in China
Labels: New versions, The team's favourite

verified reviews(2)

View the trust certificate

Reviews subject to control

For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
No inducements have been provided for these reviews
Reviews are published and kept for a period of five years
Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
The reasons for deletion of reviews are available here.

Sort reviews by :

4.5 /5

Based on 2 customer reviews