Aegis Q Pod Kit - Geek Vape

2ml 1000mAh Internal battery 20W MTL

Geekvape has done it again, with the Aegis Q or AQ pod. Armed with Tri-Proof protection, this little pod is ready to accompany you on your greatest adventures. Whether it's a trek to the highest peaks or finding your way home after waking up on a bench in a totally unfamiliar place. This podmod is splashproof, dustproof and shockproof.

The Aegis Q is also, and above all, an electronic cigarette designed for MTL indirect inhalation vaping, with exceptional flavors brought to you by its 2 ml Q cartridge with integrated coil, of which you'll receive two in this kit, the 0.8 ohm and 1.2 ohm versions. Beginners will love the Aegis Q pod's simple operation: a single button controls its 20W max power and you even get adjustable airflow. The Aegis Q won't leave you in the lurch: with 1000 mAh of autonomy, a full charge of its internal battery will keep you going all day long.

2ml 1000mAh Internal battery 20W MTL

Product Description

Geekvape Aegis Q Pod: the adventurous podmod

The Aegis Q pod is a small, lightweight e-cigarette that's not afraid of the vagaries of everyday life. Beneath its elegant metal and leather finish lies a robust pod, a quality not to be overlooked when you're stamped with the Aegis crest. Whether you're hiking, working on a construction site or having a rave in the middle of cow dung, the Aegis Q adapts to your lifestyle and isn't afraid to get wet. In fact, its Tri-proof protection makes it immune to splashes (don't go diving with it, though), dust and the little drops that can happen here and there.

Pod Geekvape Aegis Q: One button for everything

Very accessible, even for beginners, the Aegis Q pod is controlled by a single button. This button is used to lock the device, select one of three power levels and activate your vaping, although it's also possible to vape in autodraw mode.

Ladies and gentlemen, pay close attention because it's easy to use, but you still need to pay close attention to the instructions.

First, 5 presses to lock or unlock the fire button, which will prevent accidental start-up in your pocket or bag. Next, press 3 times to select the power level you wish to use, and an LED will light up to confirm the mode you have chosen. These power levels are based on the 5 to 20W power range of the AQ pod, and you'll be able to fine-tune your inhalation even further thanks to an adjustable airflow.

- Green LED: High mode.

- Blue LED: Medium mode.

- Red LED: Low mode

These power levels won't decrease with battery level, as the Aegis Q pod ensures constant power right down to the last mAh.

Geekvape Aegis Q Pod: Speaking of batteries..

For the Aegis Q pod's battery, Geekvape has pulled out all the stops, with an internal 1000 mAh battery that will last up to two days on a single charge for the average vape, or at least a full day for the truly relentless. With each puff, the Aegis Q pod's LED lights up to inform you of your battery level. Recharging is quick and easy, just plug into the USB-C port and that's all folks! (cable included).

- Green: from 100 to 70%.

- Blue: from 70 to 30%.

- Red: 30 to 0%.

The Geekvape Q cartridge

The Aegis Q pod comes with two attractive little q cartridges. These cartridges can hold up to 2 ml of e-liquid, and their coils are equipped with Geekvape's VPU technology, which improves vapor production and offers better flavor reproduction thanks to perfected absorption. In this pack you'll find the 0.8 ohm and 1.2 ohm versions. Note that a 0.6 version exists, but is a little too watt-hungry and therefore not very suitable for the Aegis Q pod.

- Q 0.80 ohm cartridge: MTL draw - for use between 12W and 18W (auto setting on AQ pod) - ratio 60PG/40VG to 40PG/60VG - compatible with nicotine salts and high nicotine levels.

- Q 1.20 ohm cartridge: very tight MTL draw - use between 8 and 12 W (auto setting on AQ pod) - ratio 70PG/30VG to 50PG/50VG - compatible with nicotine salts, CBD and high nicotine levels.

How to fill your Geekvape Q cartridge:

Remove the drip tip from the Q cartridge.
Fill the tank with e-liquid.
Replace the drip tip.

How to replace your Q Geekvape cartridge :

Remove the cartridge from the pod.
Clip another cartridge onto the battery.
Caution: If the cartridge is new, let the coil soak in e-liquid for 10 minutes in a full tank.