The Drag gang of the manufacturer Voopoo has expanded once again with the arrival of the Drag H40 pod. This compact e-cigarette has plenty of personality with its zinc-alloy coating and leather finish, not to mention its devastatingly well-finished airflow openings. It's fair to say that Voopoo hasn't lost its touch, and continues to spoil us with gear that's as beautiful as it is high-performance.
Yes, it's not enough to be an eye candy, you also have to be able to deliver in terms of performance. With its 40W maximum power and 1500 mAh internal battery, the Drag H40 pod is ready to dazzle you with its versatility and long-lasting autonomy. Buying the Drag H40 pod is also an opportunity to try out the improved version of the PNP 2 cartridge, which now has a 5 ml reservoir and is still compatible with Voopoo's excellent PNP coils. You'll also receive two PNP coils in this kit, the 0.45 ohm PNP VM3 version and the 0.3 ohm PNP-TW30, enough to get your vaping on the Drag H40 off to a flying start.
The first thing that catches the eye with this H40 pod is its perfectly executed Voopoo design. A mix of elegance brought by a zinc alloy design, aggressiveness with large airflow openings and optimal grip comfort thanks to its leather covering. In terms of colors, there's a great selection from the most eye-catching to the most classic, so you're sure to find a Drag H40 pod to suit you.
With dimensions of 104.5 × 27.5 × 26.1 mm, the Drag H40 is a compact e-cigarette that's easy to take anywhere. And, you'll see that despite its small size, it's no match for larger-caliber mods, while remaining accessible to beginners.
To get the most out of the Drag H40's 40W of maximum power, Voopoo has equipped it with its best chipset. The Gene TT 2.0 ensures that your vaping is as responsive as ever, and that you can rest easy thanks to multiple protections against overheating and short circuits.
The Gene TT 2.0 chipset offers two modes of operation:
- Smart mode: the chipset automatically recognizes the coil you're using and lets you make your settings within a power range adapted to the coil. This mode is perfect for beginners, as it means you don't have to set too much power for your coil.
- RBA mode: You have absolute power: you can manually adjust the Drag H40's power from 5 to 40W.
Keep an eye on your settings and all the info about your vaping thanks to the Drag H40 pod's 0.54" OLED display. It keeps you informed about your current wattage, coil value, puff counter and battery level.
Equipped with a 1500 mAh internal battery, the Voopoo Drag H40 pod will give you long hours of vape. Enough to vape a whole day on a single charge for the average vape, you'll be able to recharge your Voopoo pod in no time thanks to its USB-C port located below the battery (USB-C cable supplied).
Buying the Drag H40 pod is an opportunity to test the improved version of the PNP 2 cartridge. Now with a 5 ml capacity, refills will be less frequent, a good point for this cartridge compatible with Voopoo's excellent PNP coils. In this kit, you'll receive two coils designed for DL and RDL vape (PNP-VM3 0.45 ohm and PNP-TW30 0.30 ohm). If you prefer a tighter MTL-type vape, you won't be outdone: PNP coils come in a wide choice of values, and you can also install a drip tip more suited to MTL vape on your cartridge. Add to this the possibility of fine-tuning the airflow by rotating the PNP 2 cartridge on itself, and the Drag H40 pod shows us the full extent of its capabilities and versatility.
- PnP-VM3 0.45 Ohm Mesh coil: RDL draw - To be used between 25 and 35 watts - Ratio 30PG/70VG to 50PG/50/VG - Compatible with low nicotine e-liquids (up to 6 mg/ml).
- PNP-TW30 0.30 ohm Mesh coil: High vapor RDL draw - use between 28 and 35 watts - ratio 30PG/70VG to 50PG/50VG - Compatible with low nicotine e-liquids (up to 6 mg/ml).
Discover our other PNP coils and PNP-TW coils, but only select models that can operate with the Drag H40's 40W max power.
Forbidden under 18 years old
Wishlist
